Leather machinery needs to set each parameter with a certain range, use frequently encountered as a result of individual preferences: wizard like does not work. So before the leather mechanical parameter is set, should grasp the use of frequency conversion technology and performance parameter setting method, because of the different product vivit leather machinery its parameter setting method is different, even the card, the parameter setting method are also different. So, the user before the correct use of leather machinery, to select the eye line of leather machinery has set, should be conducted in the following respects.
1) confirm the motor parameters, leather machinery in the parameter setting of motor power, current, frequency, voltage, speed, bag, these parameters can be obtained directly from the motor nameplate.
(2) leather machinery control, speed control and torque control, PID control, or some other way. After a system way, generally according to the control accuracy, need to be static or dynamic identification.
(3) set the start way of leather machinery, leather machinery general factory was set to start from the panel, the user can choose start way, the actual situation can use face plate, external terminal and communication mode, a few kinds.
(4) the choice of a given signal and the frequency of general leather machinery given can also have a variety of ways, panel, parameter set, given the external voltage or current given given, communication way, of course, given the frequency of leather machinery may also be the several ways of the sum of one or more of the following ways. Properly set to parameters, leather machinery basically can work normally, if you want to get a better control effect can be modified according to the practical situation of the related parameters.
Contact: Tingting Lu International Line:+86 13915075937
Add: 118-68 Xinchang Road, Xinzha Town, Changzhou , Jiangsu, China.